| Hola que tal amigos bueno aqui les coloco un pequeño tutorial
para que vean lo facil que es reparar contac service en DCT4 PLUS con Cyclone,
primero identificamos el equipo, lo mas probable es que nos de este mensaje,
"Failed to read info - Failed to read SP info".
Aqui el Read Info:
Manufacturer (c) Nokia
IMEI 011667008464169
Mastercode 3033237072
IMEI Spare 0A11660780641406
IMEI SV 0311660780641416F7000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, EI
CNT Content: t, V 07.60, 10-04-09, RM-340, (c) Nokia,
PSN RJM863977
Product Code 0570612
Module Code 0203633
Basic Product Code 0551001
PSD 0000001800000000
LPSN 0
HW 2000
UEM 1328
UPP 3162
RFIC 0500
DSP P06w45.v42
LCD SUEZ
BT 2222-v101
Failed to read info -> Failed to read SP info
Ya que tenemos la informacion del equipo vamos a presionar Selftests y esto nos aparecera:
Selftests to proceed: 20
Passed ST_UEM_CBUS_IF_TEST
Passed ST_AUX_DA_LOOP_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_TX_IDP_LOOP_TEST
Passed ST_TX_IQ_DP_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_MBUS_RX_TX_LOOP_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_RADIO_TEST
Passed ST_WARRANTY_TEST
Failed ST_SIM_LOCK_TEST
Passed ST_PPM_VALIDITY_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_LCD_TEST
Passed ST_FLASH_CHECKSUM_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_EXT_RAM_DATA_BUS_TEST
Passed ST_EXT_RAM_ADDR_BUS_TEST
Passed ST_BT_WAKEUP_TEST
Selftests done, Tests total: 20, Tests passed: 19, Tests not passed: 1
Aqui nos dirigimos a l pestaña DCT4/WD2 y damos Unlock, esto nos aparecera:
Asic 11
HW Signature 3DB0C60DFE8828A2
Simlock Server SIMLOCK SERVER
Simlock Key 5555555555555555
Simlock Profile 5555555555015555
Simlock Aux 000B5555
Simlock IMEI 00550116670084641600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Asking card to sign HW Signature...
Signed OK (21B1427F7A1489F3B68B8359A1E5B58C8CDB907E)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Presionamos Selftest para corroborar que el equipo ya no nos da el error en sim lock:
Selftests to proceed: 20
Passed ST_UEM_CBUS_IF_TEST
Passed ST_AUX_DA_LOOP_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_TX_IDP_LOOP_TEST
Passed ST_TX_IQ_DP_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_MBUS_RX_TX_LOOP_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_RADIO_TEST
Passed ST_WARRANTY_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_PPM_VALIDITY_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_LCD_TEST
Passed ST_FLASH_CHECKSUM_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_EXT_RAM_DATA_BUS_TEST
Passed ST_EXT_RAM_ADDR_BUS_TEST
Passed ST_BT_WAKEUP_TEST
Selftests done, Tests total: 20, Tests passed: 20, Tests not passed: 0
Despues procedemos a dar flash y el equipo quedara listo para ser usado, aqui el full flash:
Scanning avaiable products...
Processing C:\Archivos de programa\Nokia\Phoenix\Products\...
Found 12 products, Filtering DCT4 Products - wait...
0 Products left after filtering. Ready.
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
MSID-Crypted: 84360B4A76D88F8C6A96AA3B0B
MSID-Plain: 2C40BAE900D3132DA9000000
FAID-Crypted: 2F2B5CC743DA8F5650C24C5F
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 36.562s
Writing 344 blocks...
All blocks written OK! Time taken 360.453s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.image_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
MSID-Crypted: 841C658FF876B29F12C77D8E9E
MSID-Plain: D26EBAF100D3132DAA000610
FAID-Crypted: 4D57F8A6F2C4BBE30EC03156
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 46.375s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 216 blocks...
All blocks written OK! Time taken 94.328s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.ppm_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
MSID-Crypted: 84938EC937AEB30E1FE3CD35D6
MSID-Plain: 3E4EBAE900D3132DAA000000
FAID-Crypted: FEACF79CB76AFCFFCEF09A8E
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 11.594s
Writing 85 blocks...
All blocks written OK! Time taken 80.172s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
PD: solo es necesario hacer flash cuando el equipo quedo en contac service por mal flasheo, como quiera ustedes antes de dar flash fijense si el equipo ya enciende normal, si enciende en blanco y despues se apaga denle flash y ya.
|
